Spray-On Textile Waterproofing OrganoTex

The impregnation can be used on all your waterproof functional garments but also works on other textiles such as cotton, fleece and wool . However, you will get the best results on synthetic materials such as polyester or polyamide . The impregnation is completely free of fluorocarbons, solvents and other potentially hormone-disrupting substances. Note that the impregnation does not give the same pearlescent effect as a spray that is not fluorocarbon-free .

The impregnation is developed and manufactured in Sweden by the environmental technology company OrganoClick, it is biodegradable within seven days. One bottle is enough for 5-6 garments or 10-12 square meters depending on how absorbent the fabric is.

Here's how:
1. Wash the textile/garment (without fabric softener) and make sure the material is completely dry.
2. Protect the work surface, shake the bottle and spray the garment/textile from a distance of 20 cm, ensuring that the entire material is evenly moistened.
3. Wait 1 minute and spray again, distributing the liquid evenly with a cloth (protective gloves are recommended as the product has a fairly low PH).
4. Wipe away excess liquid with a cloth or sponge, making sure not to leave any drops as this can cause stains on the fabric. It is important not to overdose.
5. Dry the textile in a dryer or drying cabinet (40–70 degrees) for best results (if washing instructions allow), but you can also let the product dry on its own for at least 24–48 hours.